- Make sure this fits by entering your model number.
- Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) WARM White LEDs producing 27 lumens @3000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 V AC but will operate in a range voltage from 8-12.5 VAC.
- Versatility – Use with Steps, Walls, Columns or Counter Tops. No light housing to trap unwanted bugs that would need regular cleaning!
- Economical – 40,000 Hour Life – Low Power -2 Watts per unit. Connects to any 12 Volt AC or DC Transformer
- Easy to Install – Simply slip under the cap on Walls, Columns or Stairs (Before Gluing down Cap)
- Retrofits into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.
For Wall, Column and Stair Illumination * Long Lasting LED’s – No more burned out bulbs to replace. * Economical – 40,000 Hour Life (almost 14 years @8 hrs lit per day). * Low Power – 2 Watts per unit (2) 1-watt Phillips CMD LED’s. * Durable Construction – Powder Coated Brown 304 Stainless Steel will not Rot or Rust. * Can also be used in salt spray applications. * Weather Resistant – Sealed and Rust proof, ideal for Outdoor Use. * SAFE – Cool to the touch … Very low burn risk. * Long Wire – 72″ (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) and 3/8″ (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable to fit through a ¼” hole. * Easy to Install – Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). * Versatility – Use with Steps, Walls, Columns or Counter Tops. * Connects to any 12 Volt AC or DC Transformer. *Lightweight but super strong @ 6.5 oz each. * No more wasted block from cutting and chiseling like needed for some light fixtures installations! * Installs in Minutes under coping- NO Cutting and NO Drilling! * Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) WARM White LEDs producing 27 lumens @3000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 v AC but will operate in a range voltage from 8-12.5 v AC. The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts. * Space fixtures from 36″ to 72″ apart (depending upon amount of lighting desired). * Fixture measures: 5 9/16″ (15 cm) Wide x 3 1/8″ (8 cm) Deep x 1/32″ (1 mm) Thick LED unit and the flange sticks out 5/8″ (2 cm) from the mounted surface with a 1/2″ (1.25 cm) reveal. NEW DESIGN: To retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.